The Argox 8110 scanners offers excellent scanning performance at an attractive, entry-level price. The Argox AS-8110 reads from contact to 50mm from the barcode and provides accurate decoding in seconds. This scanners features ultra-low power consumption and an all-in-one universal host interface. A Windows utility is included.
Argox AS-8110 Handheld Barcode Scanner Specifications
| Operational |
| Light source |
660 nm visible red LED |
| Optical system |
2048 pixel CCD (charge-coupled device) |
| Depth of scan field |
0-50 mm |
| Scanning width |
80 mm |
| Scan speed |
50 scans/sec |
| Resolution |
0.125mm(5mils) - Code 39, PCS=45 %, on contact |
| Print contrast |
30% or more |
| Scanning angle |
Front: 60° Rear: 60° Yaw: 75° |
| Decode capability |
Autodiscriminates all standard barcodes; other symbologies can be ordered optionally |
| Beeper operation |
7 tones or no beep |
| Indicator |
Green led |
| Mechanical |
| Length |
182 mm |
| Width-handle |
26 mm |
| Width-head |
90 mm |
| Depth-handle |
51 mm |
| Depth-head |
35 mm |
| Weigh |
150 g (cable not included) |
| Cable - K/B wedge |
Straight 2.0 m |
| Cable - universal type |
Straight 2.3 m |
| Connector type |
RJ-45 phone jack connector |
| Case material |
ABS plastic |
| Cushion material |
Rubber |
| Environmental |
| Operating temperature |
0° to 40° (32° to 104°) |
| Storage |
-40° to 60° (-40° to 140°) |
| Humidity |
5% to 90% relative humidity, non-condensing |
| Light level |
Up to 15000 Lux |
| Shock |
1.5m drop onto concrete |
| Contaminants |
Seals to resist airborne particulate contaminants |
| Electrical |
| Input voltage |
5 VDC ± 0.25V |
| Power - operating |
900 mW |
| Power - standby |
500 mW |
| Current - operating |
55 mA @ 5 VDC |
| Current - standby |
44 mA @ 5 VDC |
| Current - sleep mode |
15 mA @ 5VDC |
| DC transformers |
Class 2; 5VDC @ 450 mA |
| EMC |
FCC Class A |
| Programming |
| Programming method |
Manual (reading special barcode), DOS command through RS-232, Windows configuration program |
| Program upgrade |
Enabled by build-in flash memory |
| Programmable characteristics |
Code type selection, check digit selection, Decoding options: Transmitted character delay, Header selection, trailer selection, message suffix, good read beep tone and volume. Scanner trigger selection. Keyboard emulation type (intermessage delay, keyboard type and keyboard language). Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control, start/stop bits). | |